XP500 manual

1. Overview
2. Technical characteristics
3. Installation
4. Configuration

1. Overview

There are applications in which the number of I/O exceeds the I/O provided by WE300 and WE500.

In these cases, the customer can use an XP500 that expands the number of I/O. There are several types that normally satisfy all the customers needs.

The number of XP500 that can be used inside a single network is quite high since they are connected through Modbus.

2. Technical characteristics

2.1. 4AI-I

Description	Modbus expansion with 4 current analog inputs
Analog inputs	Number of input channels: 4 Min current: -20 mA Max current: +20 mA Impedence: <= 50 Ohm Sampling time: 0.5 - 1 sec
Serial port	Type: RS-485 Protocol: Modbus RTU (Slave) Baudrate: to 38400 bps
Power source	10 / 30 VDC
Average absorption	30 mA @ 24 VDC
Polarity inverse protection	60 VDC max
Isolation	2000 VAC 50Hz, 1min.
Working temperature	-10°C / +60°C
Storage temperature	-40°C / +85°C
Humidity	0 / 90% (not condensing)
Dimensions	(w x h x l) 17.5 x 100 x 120 mm
Weight	150 gr
Enclosure	DIN-BAR mountable dark gray plastic
CE standards	EN 61000-6-2, EN 61000-6-4

2.2. 8AI-I

Description	Modbus expansion with 8 current analog inputs
Analog inputs	Number of input channels: 8 Min current: -20 mA Max current: +20 mA Impedence: <= 50 Ohm Sampling time: 0.5 - 1 sec
Serial port	Type: RS-485 Protocol: Modbus RTU (Slave) Baudrate: to 38400 bps
Power source	10 / 30 VDC
Average absorption	30 mA @ 24 VDC
Polarity inverse protection	60 VDC max
Isolation	2000 VAC 50Hz, 1min.
Working temperature	-10°C / +60°C
Storage temperature	-40°C / +85°C
Humidity	0 / 90% (not condensing)
Dimensions	(w x h x l) 17.5 x 100 x 120 mm
Weight	150 gr
Enclosure	DIN-BAR mountable dark gray plastic
CE standards	EN 61000-6-2, EN 61000-6-4

2.3. 4AI-V

Description	Modbus expansion with 4 voltage analog inputs
Analog inputs	Number of input channels: 4 Min voltage: -10 V Max voltage: +10 V Impedence: > 100 KOhm Sampling time: 0.5 - 1 sec
Serial port	Type: RS-485 Protocol: Modbus RTU (Slave) Baudrate: to 38400 bps
Power source	10 / 30 VDC
Average absorption	30 mA @ 24 VDC
Polarity inverse protection	60 VDC max
Isolation	2000 VAC 50Hz, 1min.
Working temperature	-10°C / +60°C
Storage temperature	-40°C / +85°C
Humidity	0 / 90% (not condensing)
Dimensions	(w x h x l) 17.5 x 100 x 120 mm
Weight	150 gr
Enclosure	DIN-BAR mountable dark gray plastic
CE standards	EN 61000-6-2, EN 61000-6-4

2.4. 8AI-V

Description	Modbus expansion with 8 voltage analog inputs
Analog inputs	Number of input channels: 8 Min voltage: -10 V Max voltage: +10 V Impedence: > 100 KOhm Sampling time: 0.5 - 1 sec
Serial port	Type: RS-485 Protocol: Modbus RTU (Slave) Baudrate:u to 38400 bps
Power source	10 / 30 VDC
Average absorption	30 mA @ 24 VDC
Polarity inverse protection	60 VDC max
Isolation	2000 VAC 50Hz, 1min.
Working temperature	-10°C / +60°C
Storage temperature	-40°C / +85°C
Humidity	0 / 90% (not condensing)
Dimensions	(w x h x l) 17.5 x 100 x 120 mm
Weight	150 gr
Enclosure	DIN-BAR mountable dark gray plastic
CE standards	EN 61000-6-2, EN 61000-6-4

2.5. 4DI-4DO

Description	Modbus expansion with 4 digital inputs and 4 digital outputs
Digital inputs	Number of input channels: 4 State OFF: 0 - 3 V State ON: 10 - 30 V Impedence: 4.7 KOhm
Digital outputs	Number of output channels	2 relay SPDT
		2 relay SPST N.A.
	Minimum load: 5 VDC, 10 mA Maximum voltage: 250 Vca (50 / 60 Hz), 110 VDC
	Commutable power (max)	2A @ 250 Vca per contact
		2A @ 30 VDC per contact
Serial port	Type: RS-485 Protocol: Modbus RTU (Slave) Baudrate:u to 38400 bps
Sampling time	5 ms (max)
Power source	18 / 30 VDC
Average absorption	45 mA @ 24 VDC
Polarity inverse protection	60 VDC max
Isolation	2000 VAC 50Hz, 1min.
Working temperature	-10°C / +60°C
Storage temperature	-40°C / +85°C
Humidity	0 / 90% (not condensing)
Dimensions	(w x h x l) 17.5 x 100 x 120 mm
Weight	150 gr
Enclosure	DIN-BAR mountable dark gray plastic
CE standards	EN 61000-6-2, EN 61000-6-4

2.6. 8DI-8DO

Description	Modbus expansion with 8 digital inputs and 8 digital outputs
Digital inputs	Number of input channels: 8 State OFF: 0 - 3 V State ON: 10 - 30 V Impedence: 4.7 KOhm
Digital outputs	Number of output channels: 8 PNP Minimum load: 4 VDC, 10 mA Maximum voltage: 250 Vca (50 / 60 Hz), 110 VDC
	Commutable power (max)	2A @ 250 Vca per contact
		2A @ 30 VDC per contact
Serial port	Type: RS-485 Protocol: Modbus RTU (Slave) Baudrate:u to 38400 bps
Sampling time	5 ms (max)
Power source	10 / 30 VDC
Average absorption	45 mA @ 24 VDC
Polarity inverse protection	60 VDC max
Isolation	2000 VAC 50Hz, 1min.
Working temperature	-10°C / +60°C
Storage temperature	-40°C / +85°C
Humidity	0 / 90% (not condensing)
Dimensions	(w x h x l) 17.5 x 100 x 120 mm
Weight	150 gr
Enclosure	DIN-BAR mountable dark gray plastic
CE standards	EN 61000-6-2, EN 61000-6-4

2.7. 12DI

Description	Modbus expansion with 12 digital inputs
Digital inputs	Number of input channels: 8 (+ 4 optional) State OFF: 0 - 3 V State ON: 10 - 30 V Impedence: 4.7 KOhm
Serial port	Type: RS-485 Protocol: Modbus RTU (Slave) Baudrate:u to 38400 bps
Sampling time	5 ms (max)
Power source	10 / 30 VDC
Average absorption	45 mA @ 24 VDC
Polarity inverse protection	60 VDC max
Isolation	2000 VAC 50Hz, 1min.
Working temperature	-10°C / +60°C
Storage temperature	-40°C / +85°C
Humidity	0 / 90% (not condensing)
Dimensions	(w x h x l) 17.5 x 100 x 120 mm
Weight	150 gr
Enclosure	DIN-BAR mountable dark gray plastic
CE standards	EN 61000-6-2, EN 61000-6-4

2.8. 4T

Description	Modbus expansion with 4 configurable temperature analog inputs
Input type: RTD	Type	Min	Max
	Pt100	-200°C	850°C
	Pt1000	-200°C	200°C
	Ni100	-60°C	80°C
	Ni1000	-60°C	150°C
Input type: Resistor 2 or 3 wires	Type	Min	Max
	Low	0 Ohm	500 Ohm
	High	0 Ohm	2000 Ohm
Input type: Potentiometer	Type	Min	Max
	Low	20 Ohm	500 Ohm
	High	20 Ohm	2000 Ohm
Input calibration	±0,05 %
Linearity	±0,05 % (RTD only)
Serial port	Type: RS-485 Protocol: Modbus RTU (Slave) Baudrate:u to 38400 bps
Sampling time	5 ms (max)
Power source	10 / 30 VDC
Average absorption	30 mA @ 24 VDC
Polarity inverse protection	60 VDC max
Isolation	2000 VAC 50Hz, 1min.
Working temperature	-10°C / +60°C
Storage temperature	-40°C / +85°C
Humidity	0 / 90% (not condensing)
Dimensions	(w x h x l) 17.5 x 100 x 120 mm
Weight	150 gr
Enclosure	DIN-BAR mountable dark gray plastic
CE standards	EN 61000-6-2, EN 61000-6-4

2.9. Combo

Description	Modbus expansions with multiple analog/digital I/O
Universal Analog input	Type		Min	Max	Precision	Linearity
	100 mV		-100 mV	100 mV	±0,05 %	±0,1 %
	1 V		-100 mV	1 V	±0,05 %	±0,1 %
	10 V		-10 V	10 V	±0,05 %	±0,1 %
	20 mA		-20 mA	20 mA	±0,05 %	±0,1 %
	Pt100		-200 °C	850 °C	±0,05 %	±0,1 %
	Pt1000		-200 °C	200 °C	±0,05 %	±0,1 %
	Ni100		-60 °C	180 °C	±0,05 %	±0,1 %
	Ni1000		-60 °C	150 °C	±0,05 %	±0,1 %
	Res		0 Ohm	2000 Ohm	±0,05 %	±0,1 %
	Pot		0 %	100 %	±0,05 %	±0,1 %
	Tc J		-210 °C	1200 °C	±0,05 %	±0,1 %
	Tc K		-210 °C	1370 °C	±0,05 %	±0,1 %
	Tc R		-50 °C	1760 °C	±0,05 %	±0,1 %
	Tc S		-50 °C	1760 °C	±0,05 %	±0,1 %
	Tc B		+400 °C	1825 °C	±0,05 %	±0,1 %
	Tc E		-210 °C	1000 °C	±0,05 %	±0,1 %
	Tc T		-210 °C	400 °C	±0,05 %	±0,1 %
	Tc N		-210 °C	1300 °C	±0,05 %	±0,1 %
V/mA Analog input	Type		Min	Max	Precision	Linearity
	10 V		-10 V	10 V	±0,05 %	±0,1 %
	20 mA		-20 mA	20 mA	±0,05 %	±0,1 %
Analog outputs	Number of channels: 2 Type: 20mA Range: 0 - 20 mA Precision: ±0,05 % Linearity: ±0,05 % Load resistance: < 500 Ohm
Digital inputs	Number of channels: 3 State OFF: 0 - 3 V State ON: 10 - 30 V Impedence: 4.7 KOhm
Digital outputs	Quantity	Description
	1	Type: Solid state Voltage: 48 V (max) Resistive load: 0.4 A (max)
	2	Type: Relay SPST Resistive load: 2A @ 250 Vac, 2 A @ 30 VDC * Minimum load: 5VDC, 10 mA * Voltage: 48 V (max)
Serial port	Type: RS-485 Protocol: Modbus RTU (Slave) Baudrate:u to 38400 bps
Power source	18 / 30 VDC
Average absorption	30 mA @ 24 VDC
Polarity inverse protection	60 VDC max
Isolation	1500 VAC
Working temperature	-10°C / +60°C
Storage temperature	-40°C / +85°C
Humidity	0 / 90% (not condensing)
Dimensions	(w x h x l) 22.5 x 100 x 120 mm
Weight	150 gr
Enclosure	DIN-BAR mountable dark gray plastic
CE standards	EN 50022

3. Installation

Connect the Modbus RS-485 of the XP500 to the WE500:

From WE500 connector A to XP500 connector D+
From WE500 connector B to XP500 connector D-
From WE500 connector GND to XP500 connector GND

Then connect the XP500 power source to V+ and V-.

The following image shows the connections:

4. Configuration

In the WE500, the section we500_sw_mb_expansions allows to install each one of the expansions. The installation creates the necessary variables for handling the expansions without any additional configuration.

Hint

Contact Nethix if the XP500 will be used for expanding the I/O of devices other than the WE300 and WE500.